Totals of MOLDENERGY2017
2017-03-27 14:39:08
The 21st International specialized exhibition of power-saving technologies, gas-supply, heating and air conditioning systems MOLDENERGY 2017 is over.
The only exhibition project where recent achievements in the field of energy-saving technologies, as well as advanced technologies in the field of energetics are displayed, the exhibition MOLDENERGY 2017 was held from March 22 to 26 on the fairgrounds of the International Exhibition Center Moldexpo.
Organizer: IEC Moldexpo SA
Official support: Ministry of Economy of the Republic of Moldova
This year, 79 companies from Belarus, Moldova, Russia, Romania, Ukraine presented their products and technologies at the exhibition. Out of them, 32 companies took part in MOLDENERGY for the first time.
MOLDENERGY was held on an exhibition area of 3000 sq. m. It was visited by 8,100 person: from Germany, the Netherlands, Moldova, Romania, Italy, Poland, Turkey, Ukraine, the Czech Republic. 90% of visitors to the exhibition are specialists of the industry, including CEOs, managers, administrators, engineers, builders, electricians.
The Agency for Energy Efficiency, official partner of the exhibition, presented in its stand "The Atlas of Wind Energy Resources of the Republic of Moldova". The Atlas is made in the form of interactive maps, where real-time data are given for measurements of wind force at altitudes of 50, 100 and 150 meters, throughout the country. Presenting the Atlas at the Agency's stand, Ion Cozma, Deputy Director General of AEE, noted that, according to the conducted studies and data of interactive maps, "Moldova has the potential for generating electricity with the help of wind turbines. High-efficiency wind farms can be built on approximately 6.8% of the territory of Moldova.”
IDomus, another official partner of MOLDENERGY 2017, presented the project of the first “smart” apartment house in Moldova, whose basic subsystems provide safe and energy-efficient operation of the entire residential complex.
One of the most important sections of the exhibition was dedicated to renewable energy sources. This year, the participants of MOLDENERGY presented a number of novelties in this field. For instance, Cvadro Term SRL demonstrated geothermal pumps Diplomat Inverter with inverter compressor Danfoss, and Global Geosolar SRL presented geothermal pumps of the famous Swedish brand NIBE.
Among renewable energy sources, recently a close attention is paid to solar energy as the main direction of energy development. In this segment at the exhibition, Oguzenergy SRL presented solar installations SOLER, while Prom Solar SRL introduced the economical and safe solar collectors SOLAR FOX.
Innovations in the field of energy-saving technologies were also present. The company K-Flex Ukraina offered for the first time at the exhibition a new generation of thermal insulation materials, in particular from foamed rubber, as well as insulating rolls and tubes. Geotermal SRL presented solutions in the construction of heat-saving living spaces.
Exhibitors presented a wide range of solutions and products in the field of electrical engineering, including regulating equipment and power tools. A number of companies demonstrated new developments in ventilation and air conditioning systems from such brands as Toshiba and Skyworth.
Novelties were also presented at the stand of Energocompletcons SRL: a modern closed medium voltage switchgear of the ROTOBLOK type, configured from separate standard cells with different outfittings.
Odeskabel Moldova presented a novelty in the Moldovan market of electro-installation equipment: innovative electrical and information systems of residential buildings - Valena Life and Valena Allure. As elements of the "smart house", the systems represent a complete set of switches and sockets, with exclusive frames and effective solutions for home and office spaces.
Within the framework of the business program of the exhibition two seminars were held. The Energy Efficiency Agency conducted a seminar on resource development in the field of wind energy. Potential investors, representatives of central and local public authorities, specialists in energy enterprises, representatives of diplomatic missions and profile associations took part in the seminar. At the other seminar, the features of energy-saving equipment from the company Di & Trade Engineering S.R.L. were demonstrated.
Opinions of our exhibitors:
«Our factory participated in the exhibition with the goal to search for partners on the Moldovan market for wholesale sales. I want to note that our stand was visited by our target audience - representatives of construction organizations, designers, architects. The reputation of the exhibition as a professional platform was confirmed - we reached a number of agreements on contracts, the event was attended by a large number of industry experts. I want to express my gratitude to IEC Moldexpo for the excellent organization and, in particular, for the high level of promotion in the media."
Serghei Scheglov, Leading Specialist in Marketing and Advertising, Minsk Heating Equipment Plant
«At the exhibition MOLDENERGY 2017 we presented our novelty - heat insulation materials of a new generation, so we counted on the presence of our specialized audience: designers, installation specialists etc. The reality surpassed our expectations; in addition to visitors from the target group, our stand was also visited by customers interested in our product. We are very pleased with the participation in the exhibition, as well as with its good organization. "
Victor Gafinciuc, representative for the southern region, K-Flex Ukraine (Ukraine)
“The purpose of our presence at the exhibition was to find distributors in Moldova and to analyze the local market. The professional profile of MOLDENERGY allowed our company to gather the necessary contacts, hold negotiations with potential customers. The benefits of participation are obvious, now we will study the received information and work with the contacts. We thank the organizers for the excellent exhibition.”
Nadezhda Chekareva, Director for export, VentArt Group (Russia)
"Presenting to the visitors of the exhibition new lines of electrical products from Polish and Spanish manufacturers, we counted not only on end-users. The goal was to announce a new product to market experts. The good organization and professional status of the event allowed us to establish the necessary business contacts with representatives of electrical companies and shops. I want to note that many interested household customers visited our stand and appreciated our products. Despite the fact that we participate in the exhibition for the first time, the results of participation are considered very positive."
Oleg Leshchenko, founder, SC Vicolcom SRL
"Our expectations of participation in the exhibition were fully accomplished! We got new contacts among the target audience, there is interest in the ventilation systems that we presented. I think that the MOLDENERGY exhibition is a good opportunity to promote your product among industry experts. "
Aurelia Catana, Director, Geotermal-AV SRL
"Our company participates in several exhibitions at Moldexpo. Our task is to get new customers, and also to inform our audience about the benefits of our solid fuel boilers. Judging by the fact that the boilers we presented have been demanded by the visitors to our stand, this task has been accomplished. I also note a large percentage of specialists of the energy sector at the exhibition, this further motivates us to participate in such professional events."
Radu Pulbere, Manager, Stafolet SRL
Opinions of professional visitors:
"I highly appreciate the exhibition, because here you can meet industry professionals, representatives of related industries, as well as experts from the construction industry, discuss current trends and novelties. It is very good that MOLDENERGY is held simultaneously with the exhibition MOLDCONSTRUCT. Our company, for example, is more engaged in the field of finishing works, but at MOLDENERGY you have an excellent opportunity to see new samples of electrical tools needed in our work. "
Andrei Caraca, head of the department for sale of construction and finishing materials,
Favorit factory (Tiraspol, Transnistria)
"Our company works in the field of solar energy and I was interested what novelties will be displayed by the participants at MOLDENERGY. It was very interesting and instructive to discuss with Moldovan colleagues the aspects of energy audit of the facility where the installation of solar power plants is planned. Judging by the exhibition, the solar energy in Moldova is becoming very popular. We will think about entering the market of your country."
Alexandr Bosak, Director, Energopartner Engineering (Ukraine)
"Our company specializes in the production and supply of medium and high voltage electrical equipment. The purpose of my visit to MOLDENERGY was to get acquainted with the proposals of Moldovan companies in our field of activity, maintaining contacts with specialists. I want to note that the exhibition is a good place for creating business contacts and to maintain the image for serious companies. "
Gabriel Drobot, Director of Technical Department, Electroalfa (Romania)
The 21st International specialized exhibition of power-saving technologies, gas-supply, heating and air conditioning systems MOLDENERGY 2017 is over.
The only exhibition project where recent achievements in the field of energy-saving technologies, as well as advanced technologies in the field of energetics are displayed, the exhibition MOLDENERGY 2017 was held from March 22 to 26 on the fairgrounds of the International Exhibition Center Moldexpo.
Organizer: IEC Moldexpo SA
Official support: Ministry of Economy of the Republic of Moldova
This year, 79 companies from Belarus, Moldova, Russia, Romania, Ukraine presented their products and technologies at the exhibition. Out of them, 32 companies took part in MOLDENERGY for the first time.
MOLDENERGY was held on an exhibition area of 3000 sq. m. It was visited by 8,100 person: from Germany, the Netherlands, Moldova, Romania, Italy, Poland, Turkey, Ukraine, the Czech Republic. 90% of visitors to the exhibition are specialists of the industry, including CEOs, managers, administrators, engineers, builders, electricians.
The Agency for Energy Efficiency, official partner of the exhibition, presented in its stand "The Atlas of Wind Energy Resources of the Republic of Moldova". The Atlas is made in the form of interactive maps, where real-time data are given for measurements of wind force at altitudes of 50, 100 and 150 meters, throughout the country. Presenting the Atlas at the Agency's stand, Ion Cozma, Deputy Director General of AEE, noted that, according to the conducted studies and data of interactive maps, "Moldova has the potential for generating electricity with the help of wind turbines. High-efficiency wind farms can be built on approximately 6.8% of the territory of Moldova.”
IDomus, another official partner of MOLDENERGY 2017, presented the project of the first “smart” apartment house in Moldova, whose basic subsystems provide safe and energy-efficient operation of the entire residential complex.
One of the most important sections of the exhibition was dedicated to renewable energy sources. This year, the participants of MOLDENERGY presented a number of novelties in this field. For instance, Cvadro Term SRL demonstrated geothermal pumps Diplomat Inverter with inverter compressor Danfoss, and Global Geosolar SRL presented geothermal pumps of the famous Swedish brand NIBE.
Among renewable energy sources, recently a close attention is paid to solar energy as the main direction of energy development. In this segment at the exhibition, Oguzenergy SRL presented solar installations SOLER, while Prom Solar SRL introduced the economical and safe solar collectors SOLAR FOX.
Innovations in the field of energy-saving technologies were also present. The company K-Flex Ukraina offered for the first time at the exhibition a new generation of thermal insulation materials, in particular from foamed rubber, as well as insulating rolls and tubes. Geotermal SRL presented solutions in the construction of heat-saving living spaces.
Exhibitors presented a wide range of solutions and products in the field of electrical engineering, including regulating equipment and power tools. A number of companies demonstrated new developments in ventilation and air conditioning systems from such brands as Toshiba and Skyworth.
Novelties were also presented at the stand of Energocompletcons SRL: a modern closed medium voltage switchgear of the ROTOBLOK type, configured from separate standard cells with different outfittings.
Odeskabel Moldova presented a novelty in the Moldovan market of electro-installation equipment: innovative electrical and information systems of residential buildings - Valena Life and Valena Allure. As elements of the "smart house", the systems represent a complete set of switches and sockets, with exclusive frames and effective solutions for home and office spaces.
Within the framework of the business program of the exhibition two seminars were held. The Energy Efficiency Agency conducted a seminar on resource development in the field of wind energy. Potential investors, representatives of central and local public authorities, specialists in energy enterprises, representatives of diplomatic missions and profile associations took part in the seminar. At the other seminar, the features of energy-saving equipment from the company Di & Trade Engineering S.R.L. were demonstrated.
Opinions of our exhibitors:
«Our factory participated in the exhibition with the goal to search for partners on the Moldovan market for wholesale sales. I want to note that our stand was visited by our target audience - representatives of construction organizations, designers, architects. The reputation of the exhibition as a professional platform was confirmed - we reached a number of agreements on contracts, the event was attended by a large number of industry experts. I want to express my gratitude to IEC Moldexpo for the excellent organization and, in particular, for the high level of promotion in the media."
Serghei Scheglov, Leading Specialist in Marketing and Advertising, Minsk Heating Equipment Plant
«At the exhibition MOLDENERGY 2017 we presented our novelty - heat insulation materials of a new generation, so we counted on the presence of our specialized audience: designers, installation specialists etc. The reality surpassed our expectations; in addition to visitors from the target group, our stand was also visited by customers interested in our product. We are very pleased with the participation in the exhibition, as well as with its good organization. "
Victor Gafinciuc, representative for the southern region, K-Flex Ukraine (Ukraine)
“The purpose of our presence at the exhibition was to find distributors in Moldova and to analyze the local market. The professional profile of MOLDENERGY allowed our company to gather the necessary contacts, hold negotiations with potential customers. The benefits of participation are obvious, now we will study the received information and work with the contacts. We thank the organizers for the excellent exhibition.”
Nadezhda Chekareva, Director for export, VentArt Group (Russia)
"Presenting to the visitors of the exhibition new lines of electrical products from Polish and Spanish manufacturers, we counted not only on end-users. The goal was to announce a new product to market experts. The good organization and professional status of the event allowed us to establish the necessary business contacts with representatives of electrical companies and shops. I want to note that many interested household customers visited our stand and appreciated our products. Despite the fact that we participate in the exhibition for the first time, the results of participation are considered very positive."
Oleg Leshchenko, founder, SC Vicolcom SRL
"Our expectations of participation in the exhibition were fully accomplished! We got new contacts among the target audience, there is interest in the ventilation systems that we presented. I think that the MOLDENERGY exhibition is a good opportunity to promote your product among industry experts. "
Aurelia Catana, Director, Geotermal-AV SRL
"Our company participates in several exhibitions at Moldexpo. Our task is to get new customers, and also to inform our audience about the benefits of our solid fuel boilers. Judging by the fact that the boilers we presented have been demanded by the visitors to our stand, this task has been accomplished. I also note a large percentage of specialists of the energy sector at the exhibition, this further motivates us to participate in such professional events."
Radu Pulbere, Manager, Stafolet SRL
Opinions of professional visitors:
"I highly appreciate the exhibition, because here you can meet industry professionals, representatives of related industries, as well as experts from the construction industry, discuss current trends and novelties. It is very good that MOLDENERGY is held simultaneously with the exhibition MOLDCONSTRUCT. Our company, for example, is more engaged in the field of finishing works, but at MOLDENERGY you have an excellent opportunity to see new samples of electrical tools needed in our work. "
Andrei Caraca, head of the department for sale of construction and finishing materials,
Favorit factory (Tiraspol, Transnistria)
"Our company works in the field of solar energy and I was interested what novelties will be displayed by the participants at MOLDENERGY. It was very interesting and instructive to discuss with Moldovan colleagues the aspects of energy audit of the facility where the installation of solar power plants is planned. Judging by the exhibition, the solar energy in Moldova is becoming very popular. We will think about entering the market of your country."
Alexandr Bosak, Director, Energopartner Engineering (Ukraine)
"Our company specializes in the production and supply of medium and high voltage electrical equipment. The purpose of my visit to MOLDENERGY was to get acquainted with the proposals of Moldovan companies in our field of activity, maintaining contacts with specialists. I want to note that the exhibition is a good place for creating business contacts and to maintain the image for serious companies. "
Gabriel Drobot, Director of Technical Department, Electroalfa (Romania)
